Saved 2026-05-15 · Posted 2024-08-07 · Status: New
This is how to properly sound proof a wall🔇.
Comments
(15)
@danne.dd♥ 12024-12-20
Wouldn't say this is a modern take at all. Build the house of concrete or bricks to start out with. Then unless you need load bearing interior walls... - You are far better of using aluminium stud system with rubber padding against the floor and walls - then insulate with heavy stonewool or cellulose wool panels - there are acoustic decoupler fasteners for most aluminium systems that mitigates sound transmission from the gypsum boards to the interior stud system. - use one inch or two half inch gypsum boards with green glue inbetween the staggered gypsum boards. -Seal the floor and wall edges with tape or silicone to make all edges completely air tight! That's how you build studios!
@nicoledominiquejalo2025-09-03
I need a flooring that mandatory to use in all residential construction were doesn't matter if your apartment neighborhood
@get_money_1652025-01-30
This will also help a fire burn down your house
@vanness2892025-01-29
The only way to stop the sound is Concrete
@tom_j_19892025-01-27
3x2 s in a pairs 50mm gap in the center this keeps 400 centres
@nolan0772025-01-20
Sound proofing is an interested and controversial science.
@doctoreyedesign2025-01-19
What other ways can you soundproof
@jihndoe2988492025-01-16
What about ceilings?
@iamrainbowheart2025-01-16
What STC rating is required by code?
@contractor.tips2025-01-06
I don’t take contracting advice from anyone on a suit.
@bingaproperty2024-12-31
Right on!🔥👏
@makinitmodern2024-12-30
Is this by code? Will it pass inspection?
@toryvonwolfe2024-12-29
Those are not 2x4
@joejj582024-12-26
Far from true separation, yes its good but shouldn't be selling as best sound proofing.
@thepitch20242024-12-15
"You k ow what to do" 🔥🔥😂
Content ideas (0)
No ideas generated yet. Run /instagram-sync ideate from Claude Code to create some.
Comments (15)
Wouldn't say this is a modern take at all. Build the house of concrete or bricks to start out with.
Then unless you need load bearing interior walls...
- You are far better of using aluminium stud system with rubber padding against the floor and walls
- then insulate with heavy stonewool or cellulose wool panels
- there are acoustic decoupler fasteners for most aluminium systems that mitigates sound transmission from the gypsum boards to the interior stud system.
- use one inch or two half inch gypsum boards with green glue inbetween the staggered gypsum boards.
-Seal the floor and wall edges with tape or silicone to make all edges completely air tight!
That's how you build studios!
I need a flooring that mandatory to use in all residential construction were doesn't matter if your apartment neighborhood
This will also help a fire burn down your house
The only way to stop the sound is Concrete
3x2 s in a pairs 50mm gap in the center this keeps 400 centres
Sound proofing is an interested and controversial science.
What other ways can you soundproof
What about ceilings?
What STC rating is required by code?
I don’t take contracting advice from anyone on a suit.
Right on!🔥👏
Is this by code? Will it pass inspection?
Those are not 2x4
Far from true separation, yes its good but shouldn't be selling as best sound proofing.
"You k ow what to do" 🔥🔥😂