← 3D printing
Open on Instagram ↗
@tejslab · Tej Grewal
Saved 2026-05-15 · Posted 2026-02-21 · Status: New

Maximize transparency 💡 with just four print settings 👍✨.

#stem #3dprinter #science #diy #tech

Comments (15)

  • @divasoft 2026-02-23

    Settings??? You just replaced pei plate, lol.

  • @ykbvs25 2026-02-22

    Settings

  • @djndk 2026-03-21

    I printed a very transparent petg plate for a case. It is 2.5cm high with 100 percent infill and took 3 days. I tried to print something higher. No chance. It will collapse in it self because of the slow cooling to prevent milking

  • @gervasisunny 2026-03-09

    Some body can explain me the fan settings to do with petg ? Im stuck on fan settings

  • @squidfight_ 2026-03-03

    What about for curved vertical surfaces like a cylinder wall?

  • @austinfrasure 2026-04-06

    What printer did you print that on ?

  • @3d_goodtimes 2026-02-28

    I'm absolutely going to try this!👏

  • @jamiescotlander 2026-02-26

    *translucent

  • @aslamali6 2026-02-25

    So only transparent for flat pieces. Any recommendations for clear 3d pieces?

  • @vignesh_sureshchandran 2026-02-24

    Settings

  • @mkit.offcial 2026-02-22

    setting

  • @thosche75 2026-02-22

    How many layers thick is the print?

  • @lakshmisrikar 2026-02-23

    @ar.sstarun

  • @michael_ph_arw 2026-02-23

    All fans off?

  • @kripto1990 2026-02-22

    It's safe also g as it's not T800

Content ideas (0)

No ideas generated yet. Run /instagram-sync ideate from Claude Code to create some.