@3djake_official · 3DJake
Saved 2026-05-15 · Posted 2026-05-05 · Status: New
Struggling with small text on your 3D prints? Blurry letters and lost details are usually caused by the wrong slicer settings.
👉 Recommended settings:
Arachne / Adaptive Wall Generator
Outer Wall Speed: 50%
Layer Height: 0.08–0.12 mm
Follow for more 3D printing tips!
#3DPrinting #BambuLab #3DPrintTips #Arachne #BambuStudio #Maker #3DPrinter #PrintQuality #Shorts
Content ideas (0)
No ideas generated yet. Run /instagram-sync ideate from Claude Code to create some.
Comments (15)
Use 0.2 nozzle, and no problem
0.21 with 0.4 nozzle ? Try 0.32.
And use quicksand or a similar font
Will it work on text already put in on the model not put in through the slicer?
That worked GREAT! Thanks so much for the tip.
So cooool!
Or just use the 0.2 nozzle 🧠
Instead of changing the global outer perimeter speed, just set the "small perimeters speed" to 15-30 mm/s and keep the small perimeter length threshold value somewhere around 15-20 mm.
👌🏻👏🏻
Bad tip in my opinion.
The outer and inner Wall Setting Affect the Rest of the product so much you Can See threw it.
Text is Not that much better.
Very Bad Trade…
Maybe print it on your own next time and Show the real result insted of just Show it After slicing it.
Thank you for the video. I solved my problem!
Top
I was going to try a ,2mm nozzle🤷♂️but hey I'll definitely try this first thanx💯💪
Awesome thank you 🙏 🔥🔥🔥
🔥